ONLINE UPS 3 IN 1 OUT
SAPT offers the largest selection of power management and protection solutions available in the industry. From the desktop to the data center, from AC-powered to DC-powered equipment, SAPT is your one-stop partner for all your power needs.
The advance IGBT inverter, coupled with an isolation transformer, enhances the reliability and load adaptability. This unique construction for input and output isolation provides the advantages of noise rejection as well as clean and safe neutral line to the load.
FEATURES
- Fully Digital Signal Processing using the latest DSP technology
- IGBT Rectifier so high input power factor
- Dynamic Bypass with Eco mode
- Remote management
- Wide input voltage range
- Compatible with Engine Generator
- High reliability for Maximum System Availability
- Handles 3: Crest Factor Loads
- Intelligent Battery Management
- Large LCD Display and Mimic Panel for Real- time information
- Output isolation between UPS and Critical Load
- Low electro-magnetic interference
- Complies with international safety standards
SPECIFICATIONS
| CAPACITY | kVA | 7.5 | 10 | 15 | 20 | 25 | 30 |
| kW | 6.75 | 9 | 13.5 | 18 | 22.5 | 27 | |
| TYPE | Low Frequency Transformer based True On line Double Conversion | ||||||
| INPUT | Phase | Three Phase + N (Four Wire) | |||||
| Input PF | 0.9 (Standard) /1 (Customized) | ||||||
| Input Voltage Range | 415 VAC ± 25% | ||||||
| Input Frequency | 50Hz ± 10% | ||||||
| Input Ripple | < 5% | ||||||
| Soft Start | 0 1 ~ 00 % 5 Second | ||||||
| OUTPUT | Nominal Voltage | 220V/230V/240V AC, 1P+N | |||||
| Output Voltage Regulation | ±1 % for Linear & Non Linear Load | ||||||
| Output Frequency | 50Hz ± 0.5% | ||||||
| Crest Factor | > 3:1 | ||||||
| Output THD | Pure Sine Wave | ||||||
| Dynamic Characteristics | Instant Voltage < ±5% (From 0 to 100%), recover time < 10ms | ||||||
| Overload Capacity | At 115% Load Normal Work, 125% Load 10 Minute150% Load 1 Minute, 200% Load 1 Second | ||||||
| Inverter Efficiency | More than 93% (Full Load) | ||||||
| BATTERY | Nominal DC Voltage | 360 | 360 | 360 | 360 | 360 | 360 |
| Float Charging Voltage | 406 | 406 | 406 | 406 | 406 | 406 | |
| Equalized Charging Voltage | 426 | 426 | 426 | 426 | 426 | 426 | |
| Charging Current | 2 10 Amp Settable | ||||||
| Low Voltage Alarm | 315 | 315 | 315 | 315 | 315 | 315 | |
| Low Voltage Trip | 300 | 300 | 300 | 300 | 300 | 300 | |
| High Voltage Trip | 435 | 435 | 435 | 435 | 435 | 435 | |
| BYPASS | Phase | Single Phase (P+N) | |||||
| Manual | Maintenance Bypass Switch Provided | ||||||
| Static | No Break | ||||||
| PROTECTION | Input Protection | Input Voltage, Frequency Under/Over limit Protection | |||||
| Output Protection | Over Current, Short -circuit, Over/Under Voltage | ||||||
| Battery Protection | Over Current, Short -circuit, Over/Under Voltage | ||||||
| Temperature Protection | Inverter over temperature Protection | ||||||
| GENERAL PARAMETERS | Working Environment | Temp: 10 -55 0 C, Relative humidity : 30% – 90% | |||||
| Communication Interface | RS232/RS485, optional dry contact, SNMP card(For remote) | ||||||
| Parallel Operation | Hot stand by | ||||||
| Protection Level | IP21 | ||||||
| Safety performance | V in-n, V out-n 2 Vac, creepage<1 mA, Insulating resistance >2 MΩ (500V DC) | ||||||
| Noise (dB) | 50 – 55 | 55 – 60 | 55 – 60 | ||||
| Dimension W X H X D (mm) | 390 X 680 X 680 | 580 X 990 X 750 | |||||
| Weight (kg) | 98 | 110 | 145 | 165 | 190 | 260 | |